Trumpy 62 Motorsailer Restoration In Progress

The seller reports that the engine has less than 500 hours of use since a major rebuild.

sloop aparejado Aluminio perchas () con Inoxidable jarcia fija ()

The boat is well-equipped with quality sails and rigging including a roller-furling jib and in-mast mainsail furling. Standing stainless steel rigging and Dacron running rigging is in good condition.

12 volt battery, 110 generador de voltios, 110 shore power voltage,

Total length for moorage is 64 feet.

The vessel is double planked with an inner layer of softwood and an outer layer of mahogany screw-fastened to laminated oak frames. The inner plank is back-fastened with screws to the outer layer. The deck frame is solid wood with a marine plywood deck painted with non-skid. Upper works are solid wood with ply tops.

- Double-plank construction on laminated frames. Wood deck frame with plywood deck and wood cabin structure.

The boat has recently been re-launched following extensive refit work below the waterline including the replacement of all thru-hull fittings. There remains work to be done above the waterline and the pricing reflects this condition. Please contact the listing broker for further details.

Waterline Boats / Boatshed does not independently verify capacities and measures, which are reported from seller-provided information and/or literature.

This boat would be an ideal liveaboard as well as a long-range cruising vessel. The interior cabinetry and finishes reflect fine craftsmanship and the use of premium materials. It is spacious and grand in appearance. The covered wheelhouse, open to the aft deck, makes for a fine protected outside extension to the living space.

The surveyor commented on the interior:
"The interior is arranged for extended cruising with functional furniture and equipment and “Yacht” type finishes. The joinerwork is of Very High quality and condition of furniture and finishes is 'Excellent'. All interior cushions are in 'Like New' condition."

Starting forward is a sleeping cabin, originally for crew, with a marine toilet in the forepeak and double berth to port. The chain locker is accessed from the head through a door in the bulkhead. There is ample storage space in drawers and lockers. A tiled shower stall is to starboard in this cabin and a ladder allows egress to the foredeck.

Next a passage leads aft to a marine toilet compartment on the port side and a cabin to the starboard. The compartment has a sink, tiled shower and Vacuflush toilet. The guest cabin to port has an upper and lower berth in the sleeping cabin with hanging locker and drawer storage and a seat. The hallway passage has hanging locker space to port and space for a chest freezer as well.

Next aft is the galley to starboard with electric cook top, dual under-counter refrigerators and a double basin sink. This is a well trimmed out space with dark countertops, white painted cabinetry, and varnished teak trim. There is a large modern stainless steel sink and faucet fixture, ample counter space, a toaster oven and microwave, and a trash compacter. To port is a laundry center with washer/dryer and teak counter with drawers. Overall, this is a spacious area.

Companionway stairs lead up and aft to the saloon where there is a settee to port and teak cabinetry to starboard. The settee is u-shaped and massive, spanning the length of the saloon area. It would easily function for an additional sleeping berth. Although this a finely trimmed out area, the forward windows have been removed and replaced with plywood paneling that needs finish trim and painting for completion. This will provide much better weather protection when completed and will reduce interior heating from harsh sunlight. The remaining windows to port and starboard in the saloon are large and extensive.

Up and aft again companionway stairs to starboard lead to the wheelhouse with helm and room for seating. The wheelhouse is open to the aft deck and protected with a removable enclosure. The helm teak cabinetry spans the full width of the wheelhouse with beautiful fabrication and a large teak wheel in center. Teak decking extends from the helm station to the aft end of the wheelhouse cabin top. Windows forward provide great visibility for the helmsman and the center pane opens for ventilation.

From the saloon companionway, stairs on the port side lead down to a full-beam master cabin. This features a walk-around king bed with ample storage to be found in drawers and cabinetry. A private ensuite marine toilet compartment with tiled shower is in this stateroom. Tile work is extensive throughout the interior. This is a grand space with dark countertops and teak cabinetry including a desk and hanging lockers.

Egress from the main saloon is through the wheelhouse to the aft deck. The forward cabins have egress through the deck hatches hatch and through the main saloon. Aft cabin egress is to the main saloon and the overhead hatch.

Equipment includes:
- Webasto hot water heating;
- Cruisair marine reverse-cycle heating / cooling

3 Fogone(s)/placa(s) Eléctrico Fogón detalle